What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Just about everyone seems to have his or her own thinking with regards to Hot Water Heater Repair.
Several modern homes utilize an electric water heater for their heater, as a result of its ease and also convenience of use. Nonetheless, just like any other electrical appliances, problems may occur with its usage, suddenly. It can be truly discouraging to get up to a cold shower as opposed to a warm one or having your bathroom with water that isn't hot enough or even too hot. Whatever the situation may be, water heater issues can be rather stressful. Thankfully, we've made a list of possible solutions to your water heater issues. There are a number of factors that could create most of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you turn off the main power supply for safety. Whatever the problem is, getting it dealt with must not present excessive of a problem if you follow these steps:
Examine Your Power Supply:
As standard as this might seem, it is very necessary. Without adequate power, your hot water heater will not function. So the first thing to do when your water suddenly retires is to verify that it isn't a power issue. Check if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the concern, just turn it off and on once more. Change any type of broken or damaged fuse. Check the appliance with power after these changes to see if it's currently working.
Check the Burner in the Hot Water Heater:
If it's not a power problem, after that attempt having a look at your heating element if it is still functioning. Evaluate each of your heating elements to ensure the problem isn't with any one of them. If any one of them is defective, change that part and then examine whether the hot water is back on.
Examine Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot sufficient, you may require to inspect the temperature setups on your upper thermostat. Ensure the breaker is switched off prior to doing anything. Open the accessibility panel and press the red switch for temperature reset over the thermostat. This ought to help heat up the water. Turn the breaker back on and examine if the problem has actually been dealt with.
Call A Specialist:
If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't working, you might need to call a specialist plumber for an expert point of view. The issue with your heating system could be that the hot and cold faucets have been changed or it might be undersized for the amount of warm water needed in your house. Whatever the case might be, a specialist plumber would aid resolve the trouble.
Conclusion
Hot water heater troubles are not always significant. Many of them are because of small issues like a blown fuse or damaged burner. Replacing the malfunctioning parts should work. Nonetheless, if you are still unable to resolve the trouble, give a call to your nearest plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We were made aware of that editorial on Hot Water Heater Repair through an acquaintance on a different web address. Sharing is nice. Helping others is fun. We recognize the value of reading our article about Hot Water Heater Repair.
Visit Website
Report this page